What are the precautions for decorating the bathroom

What are the precautions for decorating the bathroom

The decoration of the toilet and bathroom is mainly to reflect its comfort and safety. If the decoration is not good, it will not only directly affect the quality of home life in the future, but also affect the mood.

Pay attention to the following matters in the bathroom decoration.

1. Canopy

Because the water vapor in the bathroom is heavier, it is necessary to choose materials that have the characteristics of waterproof, anti-corrosion, and rust.

2. Wall

The tiles on the wall should also be moisture-proof and waterproof, and the tiles should be flat when they are applied, and they should be seamed and aligned with the floor tiles.

In order to ensure the integrity of the wall and the ground; if you encounter the outlet of the water supply pipeline, the cutout of the tile should be small and appropriate to facilitate the water supply

The upper flange cover covers the cut, making the appearance perfect.

3. Ventilation

There must be an exhaust fan in the bathroom, and the exhaust fan must be equipped with a retrograde gate to prevent the dirty air from flowing back.

4. Circuit laying

The wire joints in the bathroom must be tinned and wrapped with waterproof tape and insulating tape to ensure safety; the wire body must be covered with a flame-retardant tube; all switches and sockets must have moisture-proof boxes, and the location depends on the electrical appliances. It depends on the size and location to ensure convenient and reasonable use.

5. Greening

Add life. The bathroom should not be a corner forgotten by green. When decorating, you can choose some shade-resistant, wet-loving potted plants and place them in the bathroom to make the place a little more lively.

6.Doors and windows

It is best to have windows in the bathroom to facilitate ventilation; if there is no window, pay special attention to the details of the door. To prevent the bathroom

If the water overflows, the door boundary should be slightly higher than the inside of the bathroom; the gap between the bathroom door and the ground should be larger to facilitate the return of the air; if it is a sliding door, a gap should be made between the sliding door and the bathroom floor tiles. Layer waterproof.

7. Ground

Before laying the floor tiles, be sure to do a good job of waterproofing; after the tiles are laid, ensure that the brick surface has a drain slope (usually about 1%), and the slope faces the floor drain; the ground must be closed water after the tiles are laid. The time must be at least 24 hours; when laying the floor tiles, pay attention to the seams and alignment with the wall tiles to ensure the overall sense of the entire bathroom, so as not to create a cluttered impression on the vision.

8. Waterway reconstruction

It is best not to make too much changes to the water supply and drainage lines in the bathroom. If you want to change it, it should be determined according to the specific situation. For example, different models of washing machines have different locations for the water supply and drainage.

9. Sanitary ware installation

It is best to record the distance of the drain hole before the decoration, and choose the bathtub, bath room, toilet, wash basin and other sanitary ware according to the size.

In order to avoid inappropriate size during installation; the installation of the toilet should be sealed with toilet mud first, and then fixed with expansion screws or glass glue, so that it is easy to repair when the toilet is blocked.

---